HOW TO ATTACH

A Osto-EZ-Vent provides comfort and convenience
Step 1 Step 2 Step 3
Step 1 Step 2 Step 3
To begin: You will need pouch, the Osto-EZ-Vent, 90% or higher Isopropyl Alcohol, (DO NOT use prepackaged alcohol pads.), cotton, and the instruction  sheet. On the side of the bag opposite the stoma opening, above the level of the opening, rub a small area with alcohol-moistened cotton until the gloss on the pouch surface is removed. Peel backing from vent tape. Do not touch sticky surface.
Step 4 Step 5 Step 6
Step 4 Step 5 Step 6
Open vent. Place it horizontally on cleaned area of pouch. With thumbs and forefingers, press all around vent base for best contact to pouch. Vent should stick right away, however, let bond for 24hr. Once bonded, give the vent a slight tug test. If materials stretch as shown in photo you have a good bond. Once vent is securely bonded to bag surface, bring the vent down to the pouch opening as shown in photo, open vent and insert the narrow blade of a pair of scissors through the vent opening.
Step 7 Step 8 For Covered Pouches Only
Step 6 Step 8 Step 9
Make the hole the same size as the vent opening to allow air to escape easily. Close vent, pouch with attached vent is ready to wear. Carefully cut a small hole in the cover to attach your Osto-EZ-Vent directly to the pouch.